Custom MCA for Polyurethane Foam

MCA for Polyurethane Foam

-- Steady & Reliable Manufacturer --

Introduction

Polyurethane foam is widely used in furniture, mattresses, automotive seating, and building insulation, and in every one of these uses it burns readily once ignited. Melamine cyanurate (MCA) for polyurethane foam is a halogen free, nitrogen based flame retardant additive that is dispersed into the polyol component to improve flame resistance and reduce melt dripping in both flexible and rigid foam systems.

As a manufacturer supplying MCA to foam producers and formulators worldwide, we grind and classify our product to a fine, narrow particle size so that it disperses evenly in polyol, stays in suspension during mixing, and does not interfere with cell structure. MCA is frequently combined with liquid phosphorus flame retardants or expandable graphite, which gives formulators room to balance fire performance, foam hardness, and cost.

Because foam properties are sensitive to any solid additive, particle size control, low moisture, and consistent batch to batch behavior are treated as core requirements.

Specification

ParameterTypical Value
AppearanceWhite fine powder
Chemical NameMelamine cyanurate (MCA)
CAS No.37640-57-6
Purity99.5% min
Nitrogen ContentApprox. 49%
Average Particle Size (D50)2 to 4 microns for foam grades, other sizes on request
Moisture Content0.2% max
Decomposition TemperatureAbove 300°C
Packaging25kg kraft bags or woven bags with PE liner

Exact specifications vary by product code. A certificate of analysis accompanies every shipment, and full technical data sheets are available on request for each grade.

Application

MCA is used in polyurethane systems where open flame and smoldering ignition requirements apply.

  • Flexible foam for furniture and mattresses: Cushioning materials that must resist ignition and limit flame spread.
  • Automotive seating and interior foam: Seat cushions, headliners, and trim foam used in vehicle interiors.
  • Rigid PU and PIR insulation boards: Wall, roof, and cold storage panels where fire classification is required.
  • Spray and pour-in-place foam: Field applied insulation and filling foam for building envelopes.
  • PU coatings, adhesives, and elastomers: Solid PU systems that need a halogen free flame retardant additive.

Advantages

  • Halogen free chemistry: Nitrogen based flame retardant with low smoke and no halogenated gas emission.
  • Fine, controlled particle size: Disperses evenly in polyol and resists settling during processing.
  • Synergy friendly: Works alongside phosphorus based liquids and expandable graphite to reach target ratings at lower total loading.
  • Minimal processing disruption: Supplied dry and free flowing so it has limited impact on foam rise and cell structure at recommended loadings.
  • Technical support: Formulation guidance from lab trial through full scale foam production.

Get in Touch

Your name

Your e-mail*

Your message*

{$config.cms_name} submit

Manufacturing Facility in XUSEN

We have our own production workshops and warehouses, equipped with complete production and quality inspection equipment.
As China MCA for Polyurethane Foam Suppliers and MCA for Polyurethane Foam Factory., With over 20 years in developing halogen-free flame-retardant products positions us as industry leaders in providing domestic flame-retardant solutions.
All our products comply with the stringent requirements of the WEEE, ROHS, and EUP directives.

01

Synthetic Technology

02

Composite Flame Retardant Technology

03

Surface Treatment Technology

04

Manufacturing Technology of Masterbatch

Zhejiang Xusen Flame Retardants Incorporated Company

Rubber and Plastic Industry

Suitable for materials such as PA, PP, polyester, elastomers, PE, EVA, PC, ABS, etc., widely used in household appliances, automobiles, electricians, cables, and other products.

Zhejiang Xusen Flame Retardants Incorporated Company

Composite Materials Field

Suitable for composite flame retardant products based on epoxy resin, polyurethane, etc., we can jointly develop flame retardant products with users to meet the requirements of flame retardancy and physical properties.

Zhejiang Xusen Flame Retardants Incorporated Company

Adhesive Field

Suitable for oil-based and water-based adhesives, and can be modified according to customer needs to adapt to user usage conditions and requirements, while maintaining good weather resistance and dispersibility.

Zhejiang Xusen Flame Retardants Incorporated Company

Fabric coating field

It is applicable to the flame retardant fabric coating based on acrylic lotion. The formula and process can be adjusted according to the user's requirements for flame retardancy, sizing amount, hand feel, etc. to meet the requirements for flame retardancy and physical properties.

Zhejiang Xusen Flame Retardants Incorporated Company

Fireproof coatings field

In fireproof coatings, flame retardants are mainly used in APP. We have undergone specific processing techniques for coating APP, which can meet the quality requirements of well-known international manufacturers such as PPG and ICI.

Zhejiang Xusen Flame Retardants Incorporated Company