Intumescent Coating Flame Retardant
-- Steady & Reliable Manufacturer --
Introduction
Intumescent coating flame retardants are additive systems that make a paint or coating swell into a thick, insulating foam char when heated. The char slows heat transfer to the protected surface and gives structures more time before they reach critical temperature.
The usual system has three parts: an acid source such as ammonium polyphosphate, a carbon source such as pentaerythritol, and a gas source such as melamine. We supply the APP based acid source for both water-based and solvent-based coatings, and our technical team can help balance the three components with the resin, pigment, and film thickness of your product.
Particle size, water solubility, and compatibility with the binder determine how well the finished coating cures, resists humidity, and expands in a fire, so these properties are controlled for every batch.
Specification
| Parameter | Typical Value |
|---|---|
| Appearance | White powder |
| Chemical Type | Ammonium polyphosphate (Phase II), intumescent grade |
| Phosphorus Content (P) | 30.0% min |
| Nitrogen Content (N) | 13.5% min |
| Water Solubility (10% suspension, 25°C) | 0.5 g/100 mL max |
| Average Particle Size (D50) | 10 to 15 microns |
| Moisture Content | 0.3% max |
| pH (10% aqueous suspension) | 5.5 to 7.5 |
| Thermal Decomposition Onset | Above 275°C |
| Packaging | 25kg kraft bags or woven bags with PE liner |
Exact specifications vary by product code. A certificate of analysis accompanies every shipment, and full technical data sheets are available on request for each grade.
Application
Intumescent coatings protect substrates in buildings, industry, and infrastructure where fire resistance time is specified.
- Steel structure protection: Thin film coatings on beams, columns, and frames.
- Wood and board coatings: Fire retardant finishes for interior wood, panels, and doors.
- Cable and duct coatings: Protective layers for cable trays, ducts, and penetration seals.
- Decorative fire retardant paints: Wall and ceiling paints that add fire performance to visible surfaces.
- Foam and plastic surface treatment: Coatings that protect insulation boards and plastic components.
Advantages
- Dense, even char: Forms a stable foam layer that insulates the substrate during fire exposure.
- Binder compatibility: Suited to acrylic, epoxy, amino, and other common coating resins.
- Water resistance: Low solubility helps the dried film resist humidity and washing.
- Water-based and solvent-based use: Works across both coating technologies with controlled viscosity effect.
- Formulation support: Starting formulation advice for the acid, carbon, and gas source balance.
Manufacturing Facility in XUSEN
We have our own production workshops and warehouses, equipped with complete production and quality inspection equipment.
As China Intumescent Coating Flame Retardant Suppliers and Intumescent Coating Flame Retardant Factory., With over 20 years in developing halogen-free flame-retardant products positions us as industry leaders in providing domestic flame-retardant solutions.
All our products comply with the stringent requirements of the WEEE, ROHS, and EUP directives.
Rubber and Plastic Industry
Suitable for materials such as PA, PP, polyester, elastomers, PE, EVA, PC, ABS, etc., widely used in household appliances, automobiles, electricians, cables, and other products.
Composite Materials Field
Suitable for composite flame retardant products based on epoxy resin, polyurethane, etc., we can jointly develop flame retardant products with users to meet the requirements of flame retardancy and physical properties.
Adhesive Field
Suitable for oil-based and water-based adhesives, and can be modified according to customer needs to adapt to user usage conditions and requirements, while maintaining good weather resistance and dispersibility.
Fabric coating field
It is applicable to the flame retardant fabric coating based on acrylic lotion. The formula and process can be adjusted according to the user's requirements for flame retardancy, sizing amount, hand feel, etc. to meet the requirements for flame retardancy and physical properties.
Fireproof coatings field
In fireproof coatings, flame retardants are mainly used in APP. We have undergone specific processing techniques for coating APP, which can meet the quality requirements of well-known international manufacturers such as PPG and ICI.
